-
PTFE Synthetic Grease Plastic compatible grease for all motorized hand tools with high speed Flexible shafts, Bearings, and Gears 16.5 grams -
63193 LGB Electrical Contact Set, 2 pieces -
35280 PIKO Bumper -
PIKO #35202 G160 Straight Track, 6.36" (G-Scale)
Features- Length: 160mm / 6.36"
- 100% Virgin Brass Rail
- Code 332 (0.332” high) solid rail.
- Ties are made of ultraviolet-stabilized HDPE
- Unique track geometry makes even complex track plans simple to build with only a few different track sections.
- Compatible with most other brands of G-Scale track for unlimited expansion possibilities.
- Sturdy push-together rail joiners are factory-formed to fit tightly to the rail profile.
- Made in our own factory in Germany.
-
PIKO #35028 R/C POWER SET, 22V / 5 AMP SET INCLUDES 5 AMP TRANSFORMER, R/C CONTROLLER, AND POCKER REMOTE -No loco modifications needed! -Run ANY train! -Connect the R/C analog throttle to the transformer and to your layout, put batteries (included CR2025) in the R/C pocket remote, and be running trains in minutes. -Up to 80' R/C range -
Sale!
PIKO#38150 Mighty Hauler Starter Set (G-Scale) 120V This starter set comes with a loco and two cars, analog throttle (22V / 1.6A + 16V DC), power clamps, a full circle of outdoor/indoor track (R1 radius 600mm / 23.6"), track clips, and a safety-approved transformer (120v, 24V DC, 45 VA).- Minimum recommended radius: 600mm / 23.6”
- Made in Germany
-
LGB#11040 CURVED 3" R1 Track 7.5 DEGREE 1 pc.
You are ordering 1 piece of 3" CURVED section of track. A short curved section of track for filling small gaps in the track. 7.5 degree means 48 sections make a 360 degree circle. R1 radius forms a 1290 mm (50.8 in) diameter circle. 12 PIECES/BOX -
LGB #10310 LIGHTED TRACK BUMPER This track bumper with a lighted lantern can be mounted on straight sections of track. -
Sale!
LGB 42938 NP Boxcar (Freedom) This is a model of an NP (Northern Pacific Railway) boxcar. The sliding doors on the sides can be opened. The car has metal wheel sets. Length over the couplers 57 cm / 22-7/16". Introduced Summer 2017 -
Sale!
PIKO SF Bulkhead Flatcar, #90611, w/ pipe load -
Sale!
LGB 42937 NP Boxcar (Freedom)This is a model of an NP (Northern Pacific Railway) boxcar. The paint and lettering are prototypical for Era V. The car has many separately applied details, and the sliding doors on the sides can be opened. The car has metal wheel sets. Length over the couplers 57 cm / 22-7/16".
Another NP boxcar with a different car number is available under item number 42938. -
LGB #10070 75 mm / 2-15/16“ short straight section of track, 1 PIECE
This equals 1/4 of the LGB 10000 track. 12 PIECES/BOX -
50160 LGB Track Power Cable -
17010 LGB Activation Magnet -
PIKO Ball Bearing Metal Wheelsets w/pickups, 30mm (2 pieces) -
35211 R1 Curve Track /30° R=600mm Order 12 You are ordering 1 piece of curved track. There are 12 pieces in a box. -
35294 Rail Clamps, Over-Joiner, 10 pieces (G-Scale) Features- 100% Virgin Brass
- Made to fit Code 332 (0.332” high) solid rail.
- Made in Germany.
-
LGB #10050 52 mm / 2-1/16“ short straight section of track, 1 PIECE
short straight section of track for filling small gaps in the track. 12 PIECES/BOX -
LGB #68511 CLEAR PLUG-IN LIGHT BULB, 5V This is a single clear plug-in light bulb rated at 5 volts, 33 milliamps. (ALSO KNOWN AS #130023E) We sell these bulbs individually!
