-
35280 PIKO Bumper -
PIKO #35202 G160 Straight Track, 6.36" (G-Scale)
Features- Length: 160mm / 6.36"
- 100% Virgin Brass Rail
- Code 332 (0.332” high) solid rail.
- Ties are made of ultraviolet-stabilized HDPE
- Unique track geometry makes even complex track plans simple to build with only a few different track sections.
- Compatible with most other brands of G-Scale track for unlimited expansion possibilities.
- Sturdy push-together rail joiners are factory-formed to fit tightly to the rail profile.
- Made in our own factory in Germany.
-
PIKO #35028 R/C POWER SET, 22V / 5 AMP SET INCLUDES 5 AMP TRANSFORMER, R/C CONTROLLER, AND POCKER REMOTE -No loco modifications needed! -Run ANY train! -Connect the R/C analog throttle to the transformer and to your layout, put batteries (included CR2025) in the R/C pocket remote, and be running trains in minutes. -Up to 80' R/C range -
Sale!
PIKO#38150 Mighty Hauler Starter Set (G-Scale) 120V This starter set comes with a loco and two cars, analog throttle (22V / 1.6A + 16V DC), power clamps, a full circle of outdoor/indoor track (R1 radius 600mm / 23.6"), track clips, and a safety-approved transformer (120v, 24V DC, 45 VA).- Minimum recommended radius: 600mm / 23.6”
- Made in Germany
-
PIKO G600 Straight brass Track 600mm Order 12 You are ordering 1 piece of 2' straight track. 12 pieces come in a full box. -
35201 Piko G280 Straight Track 280mm Order 12 You are ordering 1 piece of 11" (280mm)straight track. 12 pieces come in a full box. -
Sale!
PIKO #38625 SP Drovers Caboose, w/ lighted markers and metal wheels This item is sold out at Piko. -
LGB#11040 CURVED 3" R1 Track 7.5 DEGREE 1 pc.
You are ordering 1 piece of 3" CURVED section of track. A short curved section of track for filling small gaps in the track. 7.5 degree means 48 sections make a 360 degree circle. R1 radius forms a 1290 mm (50.8 in) diameter circle. 12 PIECES/BOX -
LGB #10310 LIGHTED TRACK BUMPER This track bumper with a lighted lantern can be mounted on straight sections of track. -
Sale!
PIKO SF Bulkhead Flatcar, #90611, w/ pipe load -
LGB #10070 75 mm / 2-15/16“ short straight section of track, 1 PIECE
This equals 1/4 of the LGB 10000 track. 12 PIECES/BOX -
17010 LGB Activation Magnet -
PIKO Ball Bearing Metal Wheelsets w/pickups, 30mm (2 pieces) -
35211 R1 Curve Track /30° R=600mm Order 12 You are ordering 1 piece of curved track. There are 12 pieces in a box. -
35294 Rail Clamps, Over-Joiner, 10 pieces (G-Scale) Features- 100% Virgin Brass
- Made to fit Code 332 (0.332” high) solid rail.
- Made in Germany.
-
LGB #10050 52 mm / 2-1/16“ short straight section of track, 1 PIECE
short straight section of track for filling small gaps in the track. 12 PIECES/BOX -
LGB #68511 CLEAR PLUG-IN LIGHT BULB, 5V This is a single clear plug-in light bulb rated at 5 volts, 33 milliamps. (ALSO KNOWN AS #130023E) We sell these bulbs individually! -
Sale!
LGB 42938 NP Boxcar (Freedom) This is a model of an NP (Northern Pacific Railway) boxcar. The sliding doors on the sides can be opened. The car has metal wheel sets. Length over the couplers 57 cm / 22-7/16". Introduced Summer 2017 -
PIKO #36312 HOPPER 2-BAY COAL LOAD (Hopper car not included) (G-Scale) Features- Drops into PIKO 2-bay rib-side and offset-side hopper cars
- Realistic-looking simulation of iron ore load
- One-piece molded plastic construction
- Adds detail without adding excessive weight to the car
- Created with incredibly tough weather-resistant materials
- Made in Germany
-
35211 R1 Curve Track /30° R=600mm Order 12 You are ordering 12 pieces of curved track. New-no original box 4' diameter
